MATERIAL SAFETY DATA SHEET
May be used to comply with
OSHA's Hazard Communication Standard,
29 CFR 1910.1200 Standard must be
consulted for specific requirements
IDENTITY: (as Used on Label and List)
FlameOut for Fabric 5111
P.U.R.E. O.N.E. ENVIRONMENTAL PRODUCTS
Lake Forest Ca 92630
Emergency Telephone Number:
Telephone Number for Information:
Water base Coating
FlameOut for Fabric 5111
SECTION II - HAZARDOUS INGREDIENTS INFORMATION
SECTION III-PHYSICAL DATA
Boiling Point: Vapor Density:
218 Degrees As water
Evaporation Rate: Vapor Pressure:
As water 760
Specific Gravity: Melting Point:
1.09 22 Degrees F.
Solubility in Water:Color:
Fully Soluble Clear Liquid w/Faint Lemon Odor
SECTION IV-FIRE AND EXPLOSION HAZARD DATA
Non-combustible (aqueous system)
SECTION V-HEALTH HAZARD DATA
No known health hazard by inhalation, skin contact or ingestion.
LD-50 tests indicate no acute oral toxicity and no reactions to topical administration to eyes and/or prolonged contact with skin.
None of the components in this chemical is listed by NTP, IABC, or OSHA as a carcinogen.
Effects of Overexposure:
Medical Conditions Aggravated by
May cause slight skin irritation from prolonged exposure in liquid form to persons with highly sensitive skin.
Emergency and First Aid Procedures:
If introduced into eyes or splashed in open wounds, wash with plenty of water for 15 minutes. Flush sensitive skin with water.
SECTION VI-REACTIVITY DATA
Incompatibility: (Materials to
Hazardous Decomposition or
Conditions to Avoid:
Will not occur
SECTION VII-PRECAUTIONS FOR SAFE HANDLING AND USE
Steps to be taken in case material
is released or spilled:
Flush with enough water to remove chemical residue.
Waste Disposal Method:
Dilute with excess amounts of water and dispose in accordance with Federal, State, and Local Regulations.
Precautions to be taken during
handling and storing:
Store at temperature above 30 degrees F. If frozen, warm to at least 58 degrees F. and agitate before use.
SECTION VIII-SPECIAL PROTECTION INFORMATION
Normal room ventilation
Goggles (optional) to minimize worker exposure to mists and overspray when applying as spray.
Other Protective Equipment:
Surgical mask (optional) to protect exposure to mists when applying as spray.
Wash exposed skin areas as required to avoid possible irritation to sensitive skin.
We believe that the information contained in this MSDS is current. Since the use of this information and the conditions of the use of the products are not within the control of FlameOut Chemical Co. it is the users obligation to determine the conditions of safe use of this product. The information herein is given in good faith, but no warranty, expressed or implied is made.