MATERIAL SAFETY DATA SHEET

May be used to comply with
OSHA's Hazard Communication Standard,
29 CFR 1910.1200 Standard must be
consulted for specific requirements

IDENTITY: (as Used on Label and List)
FLAMEOUT 3000 PAINT ADDITIVE


Section 1

Manufacturer`s name:
P.U.R.E O.N.E. ENVIRONMENTAL PRODUCTS

Distributors Name:
P.U.R.E. O.N.E. ENVIRONMENTAL PRODUCTS

Address:
22754 Islamare 
Lake Forest Ca 92630

Emergency Telephone Number:

Telephone Number for Information:

Date Prepared:
5-24-89


Section II - Hazardous Ingredients Information

Hazardous Components:
None


Section III-Physical/Chemical Characteristics:

Boiling Point:
750 MMG HG NA

Specific Gravity (H20=1):
NA

Vapor Pressure:
0.005MM HG @200 C.

Melting Point:
350 DEGREES C. (WITH DECOMPOSITION)

Vapor Density: (AIR=1)
NA

Solubility in Water:
INSOLUBLE

Appearance and Odor:
FREE FLOWING WHITE, ODORLESS POWDER


Section IV-Fire and Explosion Hazard Data

Flash point (Method used)
N/A

Flammable Limits LEL UEL
N/A

Extinguishing Media:
NON - FLAMMABLE

Special Fire Fighting Procedures:
IN FIRE CONDITIONS, WEAR NIOSH/MSHA APPROVED POSITIVE PRESSURE SELF CONTAINED BREATHING APPARATUS. WEAR FULL PROTECTIVE CLOTHING.


Section V-Reactivity Data

Stability:
AVOID TEMPERATURES ABOVE 275 DEGREES CELSIUS.

Incompatibility:
PROLONGED HEATING IN EXCESS OF 270 DEGREES CELSIUS ACCELERATES THERMAL DEGRADATION

Hazardous Decomposition or Byproducts:
AT TEMPERATURES IN EXCESS OF 275 DEGREES CELSIUS, DEGRADATION PRODUCTS INCLUDE HYDROGEN CHLORIDE.

Hazardous Polymerization:
Will not occur

Conditions to Avoid:
none


Section VI-Health Hazard Data

Route(s) of Exposure:

Effect(s) of Over Exposure:
acute: inhalation of dust may cause irritation of the respiratory tract.

chronic:
none.

Toxicology Data:
Acute oral toxicity

LD50 (rat) >25 g/kg

Acute dermal toxicity

LD50 (rabbit) >8 g/kg

Acute inhalation toxicity

LD 50 (rat 4 hrs.) >2.25 mg/1

Carcinogenicity:

Emergency and First Aid Procedures:


Section VII-Precautions for Safe Handling and Use

Ventilation Requirements:
PROVIDE GOOD GENERAL VENTILATION PLUS LOCAL EXHAUST AT POINTS OF EMISSION.

Precautions:
STORE IN A CLEAN, DRY, WELL VENTILATED AREA AWAY FROM HEAT. KEEP CONTAINERS CLOSED TO PREVENT CONTAMINATION. USE NORMAL SAFETY PRECAUTIONS AND GOOD INDUSTRIAL HYGIENE PRACTICES NORMALLY EMPLOYED WITH CHEMICAL SUBSTANCES.

DO NOT REUSE CONTAINERS. PRODUCT RESIDUES MAY REMAIN IN CONTAINERS. ALL LABEL PRECAUTIONS MUST BE OBSERVED. DISPOSE OF CONTAINER IN A MANNER MEETING WITH GOVERNMENT REGULATIONS.

Steps to Be Taken in Case Material is Released or Spilled:
SCOOP AND SWEEP UP ALL SPILLED PRODUCT AND OTHER CONTAMINATED MATERIAL AND PLACE IN MARKED DISPOSAL CONTAINERS. CLEAN UP AREA ON A DRY BASIS. DO NOT FLUSH TO SEWER.

Waste Disposal Method:
DISPOSE OF SPILLED OR WASTE PRODUCT AND OTHER CONTAMINATED MATERIALS IN A LICENSED LANDFILL, OR AS APPROPRIATE, BURN IN A LICENSED INCINERATOR DESIGNED TO HANDLE HYDROGEN CHLORIDE AS A PRODUCT OF COMBUSTION IN ACCORDANCE WITH FEDERAL, STATE AND LOCAL REGULATIONS.


Section VIII-Control Measures

Respiratory Protection:
NIOSH/MSHA APPROVED RESPIRATOR, FOLLOWING MANUFACTURE'S RECOMMENDATIONS, SHOULD BE USED AS A PRECAUTIONARY MEASURE WHERE AIRBORNE CONTAMINANTS MAY OCCUR.

Protective Gloves:
WHERE RESISTANT GLOVES SUCH AS COTTON.

Eye:
WEAR SAFETY GLASSES WITH SIDE SHIELDS OR CHEMICAL SAFETY GOGGLES.

Other Protective Clothing or Equipment:
EYE WASH FACILITY SHOULD BE IN CLOSE PROXIMITY. NO UNUSUAL PRECAUTIONS NEED BE TAKEN; OBSERVE GOOD WORK PRACTICES.

Work Hygienic Practices:
OBSERVE GOOD WORK PRACTICES.

We believe that the information contained in this MSDS is current. Since the use of this information and the conditions of the use of the product are not within the control of the manufacturer, it is the users obligation to determine the conditions of safe use of this product. The information herein is given in good faith, but no warranty, expressed or implied is made.